Differences

This shows you the differences between two versions of the page.

--- wiki:sns:intactgh:solver_settings [2023/08/03 13:51] – eli
+++ wiki:sns:intactgh:solver_settings [2023/08/15 08:28] (current) – eli
@@ Line 6: / Line 6: @@
 The solver settings block requires setting either:
-  * the grid cell size of the simulation or the grid resolution of the simulation
+  * S: the grid cell size of the simulation
+  * Res: the grid resolution (Res) of the simulation
 //Note: If both resolution and cell size are set, cell size will be used and resolution will be ignored//
 The solver settings block accepts the following optional inputs:
-  * whether to use a direct solver (the default) or an iterative solver
+  * St: whether to use a direct solver (the default) or an iterative solver
-  * the finite element type where 1 selects linear elements (the default) and 2 selects quadratic elements
+  * B: the finite element type where 1 selects linear elements (the default) and 2 selects quadratic elements
-  * path to custom location to store solutions
+  * SD: path to custom location to store solutions
-  * number of threads for the solver to use
+  * N: number of threads for the solver to use
 </WRAP>
 <WRAP half column>
-{{ :wiki:sns:intactgh:solver_settings.png?200}}
+{{ :wiki:sns:intactgh:solver_settings.png }}
 </WRAP>
 </WRAP>
-[[wiki:sns:intactgh:faq#Solver Settings|Frequently Asked Questions]]
+For hints on how to set these quantities, see
+❓[[wiki:sns:intactgh:faq#Solver Settings|Frequently Asked Questions]]