start

michael (michael@undisclosed.example.com) — 2026-01-12T10:15:21+00:00

Intact Solutions uses technology created with the latest patented techniques in geometric modeling, numerical methods, and computer languages. Our products provide unprecedented ease of use for even the most complex simulation needs. Intact.Simulation for Grasshopper

wiki:sns:intactgh:stress_solver

goldy (goldy@undisclosed.example.com) — 2025-09-29T10:26:57+00:00

Stress Solver A stress solver performs a linear elasticity simulation on a geometry. A stress solver has 5 inputs: * SS: a solver settings block * C: the components to perform the simulation on (from a component block) * R: restraints (from a restraint block) * L: loads (from a surface load block) * Lv: body loads (from a

wiki:sns:intactgh:vdb_lattice_brake.zip

graham (graham@undisclosed.example.com) — 2025-09-24T11:31:01+00:00

wiki:sns:intactgh:activating_migrating_license

paul (paul@undisclosed.example.com) — 2025-09-23T10:33:55+00:00

Activating or Migrating License for Intact.Simulation for Grasshopper Please follow these instructions each time you are activating or migrating a license key. Failure to do so may result in Intact.Simulation for Grasshopper not working properly.

wiki:sns:intactgh:results - [Visualize]

goldy (goldy@undisclosed.example.com) — 2025-09-17T14:03:42+00:00

Results and Visualization Applied & Reaction Loads A panel can be attached to a Stress Solver 'L' output to see the total applied loads/moments and total reaction loads/moments for a given stress simulation. Visualize All Results can be viewed using the Visualize

wiki:sns:intactgh:faq

goldy (goldy@undisclosed.example.com) — 2025-09-17T13:58:56+00:00

Intact.Simulation for Grasshopper Frequently Asked Questions 1. General 1.1 Where are the simulation files saved by default? * The simulation/error log is available in the working directory for each problem. The default simulation directories are located at

wiki:sns:intactgh:clipping_plane_sectioning.png - created

goldy (goldy@undisclosed.example.com) — 2025-09-17T13:58:35+00:00

wiki:sns:intactgh:viz_block.png

graham (graham@undisclosed.example.com) — 2025-09-12T10:32:03+00:00

wiki:sns:intactgh:combinedoutput.png - created

goldy (goldy@undisclosed.example.com) — 2025-08-29T13:05:40+00:00

wiki:sns:intactgh:license_manager.png

paul (paul@undisclosed.example.com) — 2025-08-13T15:28:42+00:00

wiki:sns:intactgh:license_manager_key_input.png - created

paul (paul@undisclosed.example.com) — 2025-08-13T15:10:27+00:00

wiki:sns:intactgh:thermal_bc

goldy (goldy@undisclosed.example.com) — 2025-08-13T11:28:52+00:00

Thermal Boundary Conditions Thermal boundary conditions are applied to faces of the components participating in the simulation by connecting to the boundary condition input on the thermal solver component. ⚠️Also, refer to Using lists for Intact components for explanation of how list input works with Load Blocks.

wiki:sns:intactgh:displacementbc - [Usage]

goldy (goldy@undisclosed.example.com) — 2025-08-13T11:25:20+00:00

Displacement Boundary Condition The DisplacementBC block in Intact.Simulation for Grasshopper can fix displacement over some surface. Displacement boundary conditions are applied to faces of components participating in the simulation by connecting to the Loads input on the stress solver component. Displacement along each axis can optionally be fixed to some value. If a value is not specified, the axis will be un-restrained.

wiki:sns:intactgh:surface_loads

goldy (goldy@undisclosed.example.com) — 2025-08-13T10:00:24+00:00

Surface Loads Surface loads are applied to faces of the components participating in the simulation by connecting to the Loads input on the stress solver component. ⚠️Also, refer to Using lists for Intact components for explanation of how list input works with Load Blocks.

wiki:sns:intactgh:lists

goldy (goldy@undisclosed.example.com) — 2025-08-13T09:56:41+00:00

Using lists for Intact components All components support the use of lists as inputs for geometry and others such as materials for a component block or the load magnitude for the various load components. The supported ratios of geometry to other input items are:

wiki:sns:intactgh:list_operation_with_loads.png - created

goldy (goldy@undisclosed.example.com) — 2025-08-13T09:44:34+00:00

wiki:sns:intactgh:beginner_examples

goldy (goldy@undisclosed.example.com) — 2025-08-11T09:43:46+00:00

Beginner Examples Here are several examples for Intact.Simulation for Grasshopper to help get started with different analysis types. * Beginner Ex-0: Getting Started Bracket * Beginner Ex-1: Stress simulation of a bonded assembly * Beginner Ex-2: Thermal simulation of a heat sink * Beginner Ex-3: Modal simulation of a drone * Beginner Ex-4: Planar orthotropic materials: transformation workflow * Beginner Ex-5: Static simulation of an orthotropic motor mount * Beginner Ex-…

wiki:sns:intactgh:read_intact_grid.zip - created

goldy (goldy@undisclosed.example.com) — 2025-08-07T09:10:32+00:00

wiki:sns:intactgh:load_grid_example.png - created

goldy (goldy@undisclosed.example.com) — 2025-08-07T09:03:58+00:00

wiki:sns:intactgh:stress_solver_loadspanel.png - created

graham (graham@undisclosed.example.com) — 2025-07-15T11:36:56+00:00