https://www.intact-solutions.com/learning/ 2026-10-23T04:44:58+00:00 https://www.intact-solutions.com/learning/ https://www.intact-solutions.com/learning/lib/tpl/dokuwiki/images/favicon.ico text/html 2023-02-20T16:04:39+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.intact-solutions.com/learning/doku.php?id=wiki:id:advanced_scenario&rev=1676934279&do=diff Stress Scenario The Stress Scenario tab can be accessed by clicking “Stress” on the main “Scenario Setup” menu. For this case, the user has full freedom to apply loads and restraints to any face. For simpler setups where Intact does most of the work, see the          text/html 2018-08-28T09:22:48+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.intact-solutions.com/learning/doku.php?id=wiki:id:assemblies&rev=1535469768&do=diff Assemblies When analyzing an assembly, there are two options for analyzing the model. * Single material analysis: All material in the assembly is the same * Multiple material analysis: Each part of the assembly gets a specified material Note: A full list of materials and their properties can be found in this text/html 2018-08-23T15:44:36+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.intact-solutions.com/learning/doku.php?id=wiki:id:components_and_materials&rev=1535060676&do=diff Components and Materials Adding materials to components is very simple in Intact.Design. Simply use the pull down menu to select one of the many preset materials available. See Supported Materials for a description of the types of materials available as well as a full list of materials and their properties. If you are working with an assembly, see text/html 2018-08-28T13:55:18+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.intact-solutions.com/learning/doku.php?id=wiki:id:faq&rev=1535486118&do=diff Intact.design FAQ Materials * I'd like to see the material properties for a supported material in the pull down list. Where can I find this information? A full list of Intact.design's supported materials and their material properties can be found on this text/html 2018-09-11T12:48:07+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.intact-solutions.com/learning/doku.php?id=wiki:id:getting_started&rev=1536691687&do=diff Getting Started Here are some helpful pages for getting started with Intact.Design. * How to Sign Up * Uploading Files * Navigation Controls Videos to get you started text/html 2018-08-22T15:49:26+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.intact-solutions.com/learning/doku.php?id=wiki:id:how_to_sign_up&rev=1534974566&do=diff How to Sign Up There are two ways to sign up for Intact. If you plan to use Intact through your Onshape account, use Option 1. If you plan to upload files directly from your computer or from other CAD programs, use Option 2. Option 1: Sign up through Onshape text/html 2024-02-22T12:24:26+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.intact-solutions.com/learning/doku.php?id=wiki:id:intact_automation&rev=1708629866&do=diff Intact.Simulation for Automation (Intact CLI) Intact.Simulation for Automation is available using Command Line Interface. Example Blog: Automated Simulation of 300 Design Submissions to GE Bracket Challenge Instructions * Sign up for the trial to get access to our software. (The software installer works for both our Plugin for Rhino Grasshopper and CLI) text/html 2023-02-20T15:58:40+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.intact-solutions.com/learning/doku.php?id=wiki:id:intact_design&rev=1676933920&do=diff INTACT DESIGN Intact.Design is a cloud based simulation software for beginners in FEA (finite element analysis). Simple and intuitive controls allow users to set up a simulation in minutes. Parts and assemblies created in any CAD program can be converted to mesh based files and imported directly to Intact.design. Additionally, supported file types can be uploaded to Onshape and then analyzed in Intact through a simple and fully integrated interface. text/html 2023-02-20T15:59:57+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.intact-solutions.com/learning/doku.php?id=wiki:id:navigation_controls&rev=1676933997&do=diff Navigation Controls [Left mouse button]: Use the left mouse button to rotate the object freely in space. [Shift]+[Left mouse button]: Locks rotation to the current viewing plane. [Scroller]: Use the mouse scroller to zoom in and out. [Right mouse button]: text/html 2023-02-20T16:04:13+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.intact-solutions.com/learning/doku.php?id=wiki:id:quick_scenarios&rev=1676934253&do=diff Quick Scenarios There are six quick scenarios available in Intact.Design. Programmed loads and restraints are placed on the object depending on which scenario you select. There are a few options you can change, but Intact.Design does most of the work for you! For more advanced setup, check out the   text/html 2023-02-20T16:03:45+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.intact-solutions.com/learning/doku.php?id=wiki:id:restraints_and_loads&rev=1676934225&do=diff Restraints and Loads Restraints are defined as surfaces that have zero displacement. A simple way to think of them is that they “anchor” the object in place. At least one restraint is needed in every simulation to ensure that the model doesn't experience acceleration or movement. text/html 2017-08-02T11:21:30+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.intact-solutions.com/learning/doku.php?id=wiki:id:sidebar&rev=1501694490&do=diff Scan&Solve INTACT DESIGN * Getting Started * How to Sign Up * Uploading Files * Navigation Controls * Simulation Setup * Components and Materials * Supported Materials * Assemblies * Restraints and Loads * Quick Scenarios * Advanced Scenario * View Results * FAQ text/html 2023-02-20T16:03:03+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.intact-solutions.com/learning/doku.php?id=wiki:id:simulation_setup&rev=1676934183&do=diff Simulation Setup To start your simulation, select a project from the Project Inventory page. When the project loads, select the New Scenario button to start a new simulation. This will direct you to the Scenario Setup page. The simple scenarios include Gravity, Squash, Squeeze, Push, Bend, and Twist. With these scenarios, Intact does most of the work for you. A full guide for each simple scenario can be found at the    text/html 2018-08-28T08:53:12+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.intact-solutions.com/learning/doku.php?id=wiki:id:supported_materials&rev=1535467992&do=diff Supported Materials Intact.design provides many material options, organized into six main groups: * Ferrous metals * Contain iron and are usually magnetic. Used for their high tensile strength and durability. * Non-ferrous metals * text/html 2023-02-20T15:59:24+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.intact-solutions.com/learning/doku.php?id=wiki:id:uploading_files&rev=1676933964&do=diff Uploading Files With Intact.design, you can upload parts from your favorite CAD program and analyze them in minutes! There are several ways you can achieve this--either through Onshape or directly through Intact.design Import through Onshape *   text/html 2018-08-29T10:27:38+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.intact-solutions.com/learning/doku.php?id=wiki:id:vibration_scenario&rev=1535560058&do=diff Vibration Scenario The vibration scenario subjects the model to vibrations and determines the natural frequencies that the object tends to oscillate at in the absence of an external force. This capability is useful for parts of a moving assembly, such as an engine, or objects subjected to varying load conditions, like a bridge in the wind. To set up a vibration scenario, follow these steps. text/html 2023-02-20T16:06:09+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.intact-solutions.com/learning/doku.php?id=wiki:id:view_results&rev=1676934369&do=diff View Results The View Results display is only available after the simulation has run and contains three main tabs: Results, Physics, and Materials. Results The results tab contains controls to explore and share the results of your simulation.